Top

INNOSILICON T3+57T BTC Miner

Innosilicon’s new and enhanced BTC miner with high computing power at 57th/s. Power efficiency could go as low as 46W/T at efficiency mode.
Pre-order program is here, Only limited quantity available!
Order Items: INNOSILICON T3+57T Miner with PSU
Delivery: October delivery

November delivery
Quantity:
October delivery:
USD ( or BTC; LTC )
For bulk purchase please ask miner_order@innosilicon.com.cn

Spec

T3+57T is a powerful new gen miner built on the industry’s leading T3+ ASIC technology with improved efficiency, durability and cooling for better long term stability . It’s well designed to reach 57Th/s at 3300W in high hash mode. In the efficiency mode, efficiency could go as low as 46W/T

  • Hashrate: 57TH/s (+/-5%)
  • Power Consumption: 3300W (+/-10%, at the wall, with 93% efficiency PSU, 25°C temperature)
  • Dimensions: 305mm(L)*203mm(W)*278mm(H)
  • Net Weight: 10.38KG
  • Allowed ambient temperature range: 0-40°
  • Network Connection: Ethernet
Notice:
Please make sure your farm use proper cooling, dust filter and 16A AC cable to meet the proper operating condition requirements.
Humidity <75%, AC voltage 210~240V, Power supply AC input current 16A, dust <0.5 Mg/m3.

Shipping&Packaging

1. Delivery time: Pre-order for October delivery, shipments starts in October. Pre-order for November delivery, shipment starts in November.

2. Please be aware: T3+57T PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C19 AC power cable to use with the PSU.

3. Please write the recipient's name, contact information and address carefully. Shipping address cannot be changed once the order is submitted. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.

4.We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damage or losses of the goods during transport and import customs clearance will be charged to the buyers.

5. In order to increase the in transit security of the high-value miner, we are implementing insurance fees with the shipping fees, starting from December 26th, 2017. We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.

Contact us

Warranty

All Innosilicon T3+57T will be tested by factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.

180 days parts warranty for any miners directly purchased from Innosilicon. If any problem, please leave an after-sales message on our message board. Our technical support team will get in touch with you asap.

Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.

The price of miners may be adjusted at any time without prior notice or price compensation to customers.

The warranty expires in the following cases:

  • Miner is demolished, privately altered or component replacement by customers;
  • Lightning, voltage surges, poor quality power supply causing damage;
  • Circuit boards and components damaged by water, exposed to moisture or corroded;
  • The circuit board or the chip is completely burned;
  • Excessive Over-clocking in an overheating environment.

If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

Note:Please ensure your miners be taken care in a proper farm with cooling and dust filter conditions. Warranty expires if you overclock miners or running miners at excessive heat or dust conditions beyond our target range